This basic landscaping tool has serrated teeth designed for cutting and shaping grass sod.Also works well for lightweight sawing tasks around the garden.4 1/4" blade; 9 1/2" overall length
#194B POTTING & SOD SICKLE
This Sickle and 8 teeth/inch versus 12 teeth/inch in the 194 Sickle, resulting in more aggressive cutting. Also, the blade is shorter & thicker for heavier tasks. originally for cutting and shaping grass sod, this saw-type sickle is good for cutting heavy roots when re-potting Bonsai. 1 1/2" blade, 8" overall length
#6001, #6002, #6003 BONSAI BROOMS
Use these hemp brooms to brush away small debris, even out top soil, dust off work benches, pottery, and other clean-up tasks. #6001: Small 4 1/2” length, Fine Bristles #6002: Medium 6” length #6003: Large 6 1/2” length Medium Bristles
#6101 & #6102 SOIL SCOOPS
These 3 piece nesting sets of soil scoops are available with screens, as shown, and without screens. Screened version sifts out finer dust than the 6103 sieve set. Scoops are made of polished stainless steel, and all are about 6 1/4” long with base diameters of 1.5”, 1.75” and 2”. #6101: With screens = 17 meshes/inch (pictured at right) #6102: Without screens
#6103 SOIL SIEVE SET
Our sieve set consists of a 12" diameter by 3" high stainless steel frame with three interchangeable screens of 4, 5, and 10 meshes per inch. Use to grade soils for layering and to remove fine compacting dust that inhibits proper drainage.
#6103M SOIL SIEVE SET
The 6103M Soil Sieve Set is similar to our 6103 Soil Sieve Set but it is smaller - it is 8" in diametter by 2 3/4" high stainless steel frame with three interchangeable screens of 5, 10, and 20 mesh per inch.
#6107 BONSAI BRUSH The long handle and stiff stainless steel bristles of this brush will access deeper and tighter areas that other Bonsai brushes cannot reach. Scrubbing trunks and branches several times a year will stimulate growth in desired areas. Has convenient loop on tip of handle for hanging. Bristles are 3/4” max. diam. over 3” length, 12” overall length
#6110 BONSAI TURNTABLE
7 1/4” diameter top; 8” diameter base; 1 5/8" high The construction of this turntable lends it to outdoor as well as indoor use. Steel ball bearings are fairly well protected from moisture to resist rusting, and a large coin-slot screw provides ready access for cleaning and maintenance. A convenient thumb-screw locks the table in the desired position when working & displaying Bonsai. 6” diameter grained top surface reduces slipping and holds over 25 pounds without binding. Black ABS plastic. 7 1/4” diameter top; 8” diameter base; 1 5/8" high
#6111 BONSAI TURNTABLE
This turntable has a large 12' diameter top, made of hard plastic - perfect for the greenhouse or outdoor use.